How To Guide

let's get
started.

what is a DabTabs™ dablet?

A DabTab dosable dablet is a brand new way to consume cannabis concentrates/extracts. DabTabs dablets offer a clean, easy, convenient way to vaporize cannabis concentrates/extracts while retaining the full-flavor, full-spectrum of the plant without combustion.

what are DabTabs™ made out of?

DabTabs brand dablets are made from a natural mineral based ceramic, which is engineered to hold a specific volume of cannabis concentrates/extracts. The material is completely inert and has been certified to NSF/ASTM 61 as a media pure enough to be used in drinking water filtration.

are DabTabs™ dablets edible?

No, do not eat DabTabs.

what do I do with DabTabs™ when empty?

We offer a "Go Green" program for DabTabs dablets. Each participating dispensary will be provided with a recycle container designed specifically for DabTabs brand dablets. If that is not convenient for you, DabTabs dosable dablets are made from ceramic, which is a naturally occurring mineral. If you choose, you could integrate them with your soil to act as a perlite.

how to use
DabTabs.

dabtab-step-11

drop.

Drop the DabTab so that it lays flat against the heat source.
dabtab-step-22

watch.

Cap and watch for the DabTab to begin releasing vapor.(this may take up to 30 seconds)
dabtab-step-33

vape.

Draw as you would normally.
dabtab-step-44

enjoy!

Let the DabTab cool before dispensing.
 

FAQ.

All of our most commonly asked questions can be found below. Have a question that isn't covered here? Feel free to reach out to us on our contact page and we'll get that question answered!

1How is each dose measured?

DabTabs are engineered to hold a specific volume of concentrates/extracts. Each DabTab is 50mg (1/20th of a gram). 10 DabTabs are equivalent to 1/2 gram of concentrate/extract and 20 DabTabs is equivalent to 1 gram of concentrate/extract.

2Do DabTabs dissolve?

No, DabTabs hold their original form from beginning to end. DabTabs are just a container for concentrates/extracts. Once the concentrates/extracts have been vaporized from within, the DabTab is then disposed of. Go to dabtabs.com/recycle for more information.

3What makes DabTabs better than "traditional" dabs?

DabTabs allow you to vaporize cannabis concentrates/extracts providing all of the flavor of a “traditional dab” with far more convenience and less mess. A DabTab holds the concentrate/extract within it’s core and is only released when it reaches the optimal temperature of 450°F or higher. This leaves DabTabs dry to the touch and allows for easy transportation and storage.

4How do I know when the DabTabs are empty?

Typically you can get two to three full draws from a single DabTab. After the first initial draws, you will notice the vapor begin to taper off. Throughout this process, the DabTab will darken in color signifying that your session is complete or near complete.

5Do I need to use a carb cap?

Yes, place the carb cap on immediately after dropping in the DabTab, allowing the DabTab itself to get up to its optimal temperature. Once your session is complete, use the tweezers to remove the used Dabtab, as it will be VERY HOT to the touch.

6What is the ideal temperature for using DabTabs?

Between 450°-550° degrees Fahrenheit.

1Do I need to worry about DabTabs leaking?

No, the concentrate/extract within the DabTabs will not release until activated by a heat source. Unlike traditional forms of extracts like shatter and wax, DabTabs can withstand high temperatures, for example, leaving them in your car will not cause your DabTabs to leak.

2Do DabTabs need to be flat in my e-nail/banger?

The DabTab works best flat, and not on its side because the heat doesn't spread as evenly. Once hot enough you will begin to see vapor escaping from within the DabTab. In some instances, once the carb cap is on, the DabTab will spin in a circular motion inside your bucket with each draw you take, this is OK!

3What equipment do I need to use DabTabs?

While DabTabs are a new product to the market, they are compatible with multiple rigs/vaporizers already on the market. As long as heat settings reach upwards of 450° degrees Fahrenheit and the DabTab fits correctly in the device, you are ready to begin vaping.

4How do I remove my DabTabs?

DabTabs are VERY HOT! Once your dabbing session is complete the DabTab will remain hot to the touch for a while, use tweezers to remove the used DabTab from you device.

5Why are DabTabs different colors?

The color of the DabTabs reflects the color of the concentrate/extract they are filled with.

6Certifications
 

device instructions.

dab rigs and bangers.

1Titanium, Quartz, & Ceramic e-nails

How to use: Set the temperature to 600-700° F and allow for the device to come to heat. Place the DabTab flat on the e-nail so that as much of the DabTab is in contact with the heating element as possible. Apply the carb cap immediately. It should take 15-30 seconds for the DabTab to come to the correct heat (450-550°). Inhale when the DabTab begins to emit vapor.

2Titanium and Ceramic Torched Bangers

How to use: Apply torch and allow for the banger to come to medium-high heat, wait 15-30 seconds for the banger to cool to 600-700°F. Place the DabTab flat on the banger so that as much of the DabTab is in contact with the heating element as possible. Apply the carb cap immediately. It should take 15-30 seconds for the DabTab to come to the correct heat (450-550°). Inhale when the DabTab begins to emit vapor.

1Thick Walled Quartz Bangers

How to use: Apply torch and allow the banger to come to glowing red heat. Wait 15-30 seconds for the banger to cool. Place the DabTab flat on the banger so that as much of the DabTab is in contact with the banger as possible. Apply carb cap immediately. It should take 15-30 seconds for the DabTab to come to the correct heat (450-550°). Inhale when the DabTab begins to emit vapor.

2Thin Walled Quartz Bangers

How to use: Apply torch and allow for the banger to come to medium-high heat. Place the DabTab flat on the banger so that as much of the DabTab is in contact with the banger as possible, apply carb cap immediately. Continue to lightly heat until the DabTab begins to vaporize (450-550°). Inhale when the DabTab begins to emit vapor.

portable devices.

1Direct Quartz Coils (Most Common)

These vaporizing products are heated using resistive wires wrapped around a quartz rod, usually directly touching the vaporizable product. Quartz has less heat retention than the ceramic, so continual heating is usually required.

Popular Devices: Shatterizer, Yocan Evolve, Atmos q3/Greedy, KandyPen Elite/Gravity/Prism, Dr. Dabber Ghost

How to use: Place a DabTab flat on the heating element. Apply carb cap immediately when applicable. Press fire/heat button for approximately 10-30 seconds until vapor begins collecting in the heating chamber. While still pressing the fire/heat button, begin drawing slowly as to not cool the heating chamber. Pulsing heat on and off at this point prevents excessive heating of the DabTab and produces a more pleasant vapor. Release fire/heat button when done inhaling.

2Direct Quartz Coils

These vaporizing products are heated using resistive wires wrapped around a ceramic rod, usually directly touching the vaporizable product. The ceramic rods have a higher heat retention than quartz rods, so continual heating may not be required.

Popular Devices: Puffco Pro 2, Thisthingrips r2 series, Skillet Ti2

How to use: Place a DabTab flat on top of the ceramic coil so that the majority of the DabTab is in contact with the heating element. Apply carb cap immediately when applicable. Press the fire/heat button for about 10- 30 seconds, until vapor begins collecting in the heating chamber. Depending on the amount of heat output, the user may or may not need to continue pressing the fire/heat button while drawing. Slow draws produce more vapor, as they do not cool the heating chamber as much as a fast draw would.

1Indirect Ceramic/Quartz

Any device where the vaporizable product is heated in a way where it is never exposed to the direct heat source.

Popular Devices: Puffco Peak, Dr. Dabber Switch/ Boost, TabRig

How to use: Place a DabTab flat in bucket or on heating surface, press fire/heat button for roughly 10-30 seconds (depending on the device, you may need less or more time) or until vapor begins collecting in the heating chamber. Begin drawing as slow as possible, while still holding the fire/heat button. Slow draws produce more vapor, as they do not cool the heating chamber as much as a fast draw would. Release fire/heat button when done drawing from vaporizer.

2Dry-Herb Vaporizers

These devices are meant to vaporize dry plant material versus extracts. They usually have large ceramic or metal heating chambers with small holes for airflow.

Popular Devices:PAX 2/3, Mighty, DaVinci Models, Ghost MVT

How to use:If the DabTab fits, place into heating chamber in any orientation. Set the vaporizer to a higher heat setting than usual (usually 420° F or higher), and allow the vaporizer to heat. When indicated by the vaporizer or when mild vapor is seen, wait another few seconds (10-30) before beginning to inhale. Slow draws produce more vapor, as they do not cool the heating chamber as much as a fast draw would.